Chinese launch cadence picks up as Tianlong-3 prepares for launch
Date:
Fri, 08 Aug 2025 12:59:10 +0000
Description:
Chinas Space Pioneer is preparing for the maiden launch of its Tianlong-3, a  vehicle similar The post Chinese launch cadence picks up as Tianlong-3  prepares for launch appeared first on NASASpaceFlight.com .
FULL STORY ======================================================================
Chinas Space Pioneer is preparing for the maiden launch of its Tianlong-3, a  vehicle similar in design, size, and payload capacity to the Falcon 9, just  over a year since the dramatic static fire of its first stage. This is set to  be the first of several commercially developed reusable launchers set to make  their debut before the end of the year. 
Across the private sector, companies are moving forward with new launch  vehicles and reusable hardware, such as Space Epoch, which has now  successfully fired an engine that was previously flown and recovered from a  splashdown. Meanwhile, iSpace has launched Chinas first droneship to support  propulsive landings at sea. 
 
Despite a slow start to the second half of the year, Chinese launch cadence  increased towards the end of July, with four launches inside as many days.  These included a successful return to flight for iSpaces Shuang Quxian1 (or  Hyperbola 1)  a vehicle which had suffered a fourth stage anomaly on a  previous mission earlier in the month and now sits on a 50% success rate  across eight flights. iSpaces Shuang Quxian1 (Hyperbola 1) launches 
Kunpeng-03 from Site 95A at the Jiuquan Satellite Launch Center (Credit:  iSpace) 
The series of launches also notably included the second for the new Chang  Zheng 12 (CZ-12) rocket, this time carrying its first batch of Guowang  internet satellites . See Also China Forum Section NSF Store Click here to  Join L2 
Launches for the megaconstellation began back in February but had flown two  months apart until recently. Missions have dramatically ramped up with three  batches being lofted to low-Earth orbit (LEO) inside eight days in late July  and early August, spread across three different launch vehicles. A late July  launch aboard a Chang Zheng 6A from Taiyuan carried five satellites, while a  Chang Zheng 8A and the aforementioned CZ-12 lofted a further nine satellites  each. 
The state-owned China Satellite Network Group, or SatNet, has deployed 57 of  these satellites to date, with reports that it plans to launch around 400 by  the end of 2027. The eventual constellation is expected to grow to 12,992  satellites. This will be made up of 6,080 in the low orbit GW-A59  sub-constellation at altitudes below 500 km, offering initial broadband  coverage. The rest will orbit in the higher GW-A2 sub-constellation at 1,145  km, providing a more global reach. 
Guowang was first registered with the International Telecommunication Union  (ITU) in 2020, a regulatory body with which radio frequency spectrums are  reserved. The ITU requires companies to complete their constellations within  seven years of launching their first satellite, and to reach various  milestones in between, or risk losing rights to the frequency. Amazons Kuiper  constellation faces similar expectations as it endeavors to deploy half of 
its constellation by the end of July 2026 to satisfy its license with the  Federal Communications Commission (FCC). Chang Zheng 6A launches the SatNet  Group 05 mission from LC-9A at the Taiyuan Satellite Launch Center (Credit:  Weibo user / Peoples Daily) 
A rival constellation, Qianfan (Thousand Sails, also known as G60), is  operated by SpaceSail in Shanghai. It has similar ambitions to eventually 
grow to around 14,000 satellites. SpaceSail currently has 90 satellites in  orbit to date, launched in five batches of 18 spacecraft. Both  megaconstellations aim to compete with Starlink in size and reach, but remain  limited, for the time being, by the current bottlenecks in launcher  availability and the speed of manufacturing the satellites. New commercially  developed vehicles are edging closer to their debut launches, while some  satellites are being manufactured by more than one company. 
The most recent batch of Guowang satellites was the first to be produced by  Galaxy Space, for example, and the first time that a commercial aerospace  company had mass-produced these satellites. Galaxy Space reports that it has  ramped up its automated production line to shorten the satellite development  cycle by 80%. 
Reliable mass production will be critical, as illustrated when only five of  the 18 Qianfan satellites in the second batch reached their intended orbital  altitude last October. The Quinfan satellites are manufactured by the  Shanghai-based Genesat, which was also new to high-volume production and is  committed to producing hundreds of the satellites in a new state-supported  factory in the Songjiang district. Genesats facilities, inaugurated last  December, are said to be capable of producing one satellite per day. Chang  Zheng 12 launches for the second time, carrying the first batch of Guowang  satellites to be manufactured by Galaxy Space (Credit: Galaxy Space) 
SpaceSail will need a significant number of launches to reach its deployment  goal of 648 Qianfan satellites by the end of this year. This ambition was  first announced back in November 2023 and will allow it to begin a regional  service before the network scales up further between 2027 and 2030. Although  the ITUs bring-into-use rules state that 10% of the constellations satellites  should be in place by the end of next year, the operators are likely to  request an extension as this amounts to around 1,300 satellites and would be  unachievable at the current pace. 
Julys CZ-12 launch was also the second from the Commercial LC-2 pad at  Wenchangs commercial spaceport , operated by the Hainan International  Commercial Aerospace Launch Company (HICAL). The only previous launch from  this pad was the debut launch of the CZ-12 last November. 
It lies adjacent to the Commercial LC-1 pad, which was built specifically for  the Chang Zheng 8 (CZ-8) and its enhanced CZ-8A variant. To date, this has  also launched only two missions. The most recent, flown by a CZ-8A had been  expected to take place in May but was rolled back from the pad two days 
before launch. It finally lifted off on July 30, carrying SatNets Group 06  batch with nine Guowang satellites. Render of the marine recovery ship which  CCCC Dredging Technology and Equipment National Engineering Research Center  recently won a contract to construct (Credit: HICAL) 
Sea-based launches have also been sparse this year, with only two launches  from Chinese coastal waters in the first half of the year. Galactic Energy  launched three Yunyao satellites aboard a Gushenxing-1S (Ceres 1S) in May, 
and is currently working on both an upgraded Gushenxing 2 solid rocket and  preparing its kerolox-powered Zhishenxing-1 (Pallas-1) for a debut by the end  of the year. Chinarocket had also lofted ten satellites aboard a Jielong 3 in  early January, and this week will launch an undisclosed payload from a sea  platform aboard a second Jielong 3 on August 8. 
Moving from sea launches to planning infrastructure for future sea 
recoveries, the CCCC Dredging Technology and Equipment National Engineering  Research Center recently won a contract to construct a marine recovery ship 
to support landings and recoveries of rockets. Like SpaceXs fleet of  droneships, the vessel will not be self-propelled but will employ  stationkeeping to maintain an accurate position. It will operate in waters  roughly 300 to 700 km offshore from the Wenchang Satellite Launch Center in  Hainan province. 
 iSpace shared a video in early August of a colorful launch ceremony for its  own droneship, dedicated to the Shuang Quxian3 (or Hyperbola-3) rocket, as it  took to the seas for the first time. The Xngj Guhng Ho , which roughly  translates to Interstellar Return/Homecoming, left the Runyang Shipyard in  Yangzhou on Aug. 5. Once further outfitting is completed in Jishui, it will  undergo sea trials near Hainan in September. iSpaces droneship for the Shuang  Quxian3 (or Hyperbola-3) shortly after its launch ceremony (Credit : iSpace) 
At 100 m in length, it is slightly longer than the droneships in SpaceXs  fleet, but its width of 42 m is 20% narrower. It has a larger deck area,  measuring approximately 60 m by 40 m. The autonomous ship will utilize a DP2  dynamic positioning system for stability at sea, though it remains unclear  whether the vessel will feature a mechanism akin to SpaceXs Octagrabber to  secure boosters after landing. 
Construction continues on pads LC-3 and 4 at the HICAL site, which will  eventually extend to eight launch pads in the future. According to plans  announced last October, a second commercial spaceport will be built within 
100 km of the Xichang Satellite Launch Center , with one billion yuan of  capital invested in the project. Construction has yet to begin, and no formal  timeline or pad count has been released so far. 
The current Xichang launch site has two active fixed launch pads, nestled in  the hillsides of the southern Sichuan mountain region, and also supports  responsive launches of the Kuaizhou-1A from a mobile launcher. On the last 
day of July, this four-stage vehicle lofted a Chinese-built Earth observation  satellite for Pakistans Space and Upper Atmosphere Research Commission  (SUPARCO) into low-Earth orbit. The satellite will support disaster  management, agricultural and urban planning, and national security. An Expace  Kuaizhou 1A launches from Xichang carrying Pakistans PRSS-01 satellite on 
July 31, 2025 (Credit: Expace) 
 New CNSA Regulation 
The China National Space Administration (CNSA) announced its Regulation on  Strengthening Quality Oversight of Commercial Space Projects in late July.  This mandates full lifecycle quality oversight of commercial space 
activities, from design and development through to launch, recovery, or final  decommissioning of spacecraft. This additional regulation requires all 
private space companies to demonstrate end-to-end compliance, introducing  standards, emphasizing accountability, and improving risk management in 
Chinas accelerating private space sector. 
While not cited, the likely catalyst for this was Space Pioneers static fire  anomaly just over one year ago on June 30, 2024. The first stage unexpectedly  broke free from its test stand during the test at Gongyi, flew uncontrolled  for several hundred meters, and crashed in the nearby mountainous area. This  caused a dramatic explosion, but fortunately, no casualties. 
Space Pioneer has since detailed over one hundred improvements made to the  vehicles structure, engine section, and other systems to mitigate this. The  company also worked with the CNSA to implement many other procedural  improvements, which the new regulation appears to formalize. The improved  engine section of the Tianlong-3 in the assembly building (Credit: Space  Pioneer) 
 Tianlong-3 nears Maiden Launch 
One year on, rehearsals have been completed in readiness for the launch of  Space Pioneers Tianlong-3 as it prepares for its maiden launch, potentially 
in September. 
Tests of the pad and infrastructure at the companys own facility within the  Jiuquan Satellite Launch Center in July used a mockup vehicle simulator. 
These verifications ranged from the horizontal transportation of the vehicle  from the assembly building to raising it vertically on the pad, and 
validating connectivity to the ground service equipment. 
The two-stage Tianlong-3 is very similar in size, design, and payload 
capacity to SpaceXs Falcon 9. Its nine Tianhuo-12 (sky fire) engines burn the  same mix of liquid kerosene, also known as RP1, and liquid oxygen and can  produce up to 8,000 kilonewtons of thrust. Space Pioneer is initially 
planning to recover and refly its boosters up to ten times. To support this,  the first stage has four grid fins to guide it back to Earth, while four  retractable landing legs will be used in later flights for propulsive  landings. Tianlong-3 launch rehearsals using a simulator on the transport  erector (Credit: Space Pioneer) 
Tianlong-3 is one of several commercially developed rockets that are expected  to debut this year and are designed to be reusable. The list also includes 
CAS Spaces Lijian-2 (Kinetica-2) and Landspaces stainless steel ZhuQue-3 ,  both of which have been targeting an end-of-September maiden launch. 
The Lijian-2 is a little smaller in height and diameter than a Falcon 9, 
while the 4.5-m diameter ZhuQue-3 is a step larger with more thrust, thanks 
to the nine reusable Tianque12A engines, which burn liquid methane and oxygen  in a gas-generator cycle. 
Meanwhile, iSpace has conducted load-bearing tests on the 17-m liquid methane  tank for its Shuang Quxian3 (SQX-3, or Hyperbola-3) as it progresses towards  an end-of-year debut. The 4.2-m diameter tank was manufactured in-house using  the companys proprietary friction stir welding production line and was filled  with cryogenic liquid nitrogen for these tests using various load profiles.  The Shuang Quxian3 (Hyperbola-3) first-stage methane tank is prepared for its  cryogenic load testing (Credit: iSpace) 
 Space Epoch steps toward reusability 
Space Epoch has successfully test-fired the Longyun-70 engine from its  Yuanxingzhe-1 vehicle, which was recently recovered from the Yellow Sea. The  stainless steel prototype took its first low-altitude test flight on May 28,  lasting around 125 seconds and reaching around 2.5 km in altitude. It  completed the flight with a controlled descent, reigniting its engine for a  hover and a soft vertical splashdown off the coast of the Shandong Province,  after which it was recovered and towed to shore. 
Translating to Dragon Cloud, the Longyun engine uses a gas-generator cycle 
and burns liquid oxygen and methane as propellants. It supports multiple  restarts with the ability to throttle down to 30%. The engine was reported to  have achieved 100% thrust during the 100-second test. 
The demonstrator vehicle measures 26.8 m in length and has a diameter of 4.2  m. It carried a 20 kg payload of example packages from e-commerce partner  Taobao to verify that the cargo bay successfully protects payloads from the  vibration, mechanical loads, and thermal exposure of launch, and is resistant  to fire and moisture. The final vehicle will have a volume of over 120 square  meters for the potential delivery of commercial payloads, and a capacity of 
up to 6,500 kg to Sun-synchronous orbit. Space Epoch fires a previously flown  and recovered Longyun-70 engine (Credit: Space Epoch / Arrow Technology) 
While the vehicle body is also currently undergoing inspection, this test  firing is a significant step towards demonstrating the vehicles reusability.  The company aims to conduct the Yuanxingzhe-1s first orbital launch and sea  recovery by the end of the year and has ambitions to launch up to 25 times  annually. 
 (Lead image: Tianlong-3 simulator at the launch pad during launch rehearsals 
 Credit: Space Pioneer) 
 
The post Chinese launch cadence picks up as Tianlong-3 prepares for launch  appeared first on NASASpaceFlight.com .
======================================================================
Link to news story: 
https://www.nasaspaceflight.com/2025/08/china-roundup-08072025/
--- Mystic BBS v1.12 A49 (Linux/64)
 * Origin: tqwNet Science News (1337:1/100)