Hello Blue,
On Sun, 5 May 2024 13:07:18 -0500, you wrote:
This post got me thinking, though, so I fired up MM on a QWK packet.
It truncates the subjects to ~24 on replies also. I wonder if that is a *QWK* standard and all QWK readers do it when processing QWK packages?
That's definitely possible. I haven't kept up with (or even looked at) QWK standards. But even taking a look at Synchronet's wiki about QWK it does seem to show the length of 25 bytes (with the last byte reserved for an ascii 32 character = 24 bytes). So good call on that, as that would explain it.
This post got me thinking, though, so I fired up MM on a QWK packet.
It truncates the subjects to ~24 on replies also. I wonder if that is a *QWK* standard and all QWK readers do it when processing QWK packages?
You are correct - 24 characters is the limit for subject lines in QWK packets.
The specs are a 25-byte ASCII string for the subject line - the last character must be NULL, so 24 printable characters. http://wiki.synchro.net/ref:qwk
I assume the above site is considered a reputable source. ;)
I don't know the history behind it, whether the limit was arbitrarily chosen for QWK packets or if it was a pre-existing limit enforced by some BBS software.
The specs are a 25-byte ASCII string for the subject line - the last character must be NULL, so 24 printable characters. http://wiki.synchro.net/ref:qwk
I assume the above site is considered a reputable source. ;)
It is. :-) But you're misreading it: there's no subject
string termination needed (space or NULL), so the full
25 characters can be used in a standard/original QWK
message. QWKE extends the subject lengths beyond 25
chars.
Sysop: | Saxainden |
---|---|
Location: | Littleton, CO |
Users: | 30 |
Nodes: | 10 (0 / 10) |
Uptime: | 15:21:30 |
Calls: | 357 |
Calls today: | 2 |
Messages: | 37,320 |